Configuring The Scheduler; Information About The Scheduler - Cisco Nexus 3548 series Configuration Manual

Configuring the Scheduler

This chapter contains the following sections:
•
•
•
•
•
•
•
•

Information About the Scheduler

The scheduler allows you to define and set a timetable for maintenance activities such as the following:
• Quality of service policy changes
• Data backup
• Saving a configuration
Jobs consist of a single command or multiple commands that define routine activities. Jobs can be scheduled
one time or at periodic intervals.
The scheduler defines a job and its timetable as follows:
Job
Schedule
Information About the Scheduler, on page 79
Licensing Requirements for the Scheduler, on page 80
Guidelines and Limitations for the Scheduler, on page 80
Default Settings for the Scheduler, on page 81
Configuring the Scheduler, on page 81
Verifying the Scheduler Configuration, on page 87
Configuration Examples for the Scheduler, on page 88
Standards for the Scheduler, on page 89
A routine task or tasks defined as a command list and completed according to a specified schedule.
The timetable for completing a job. You can assign multiple jobs to a schedule.
A schedule is defined as either periodic or one-time only:
• Periodic mode- A recurring interval that continues until you delete the job. You can configure the
following types of intervals:
• Daily- Job is completed once a day.
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
8
C H A P T E R
79