Displaying And Clearing Log Files - Cisco Nexus 3548 series Configuration Manual

Configuring System Message Logging

Displaying and Clearing Log Files

You can display or clear messages in the log file and the NVRAM.
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Example
The following example shows how to display messages in a log file:
switch# show logging last 40
switch# show logging logfile start-time 2007 nov 1 15:10:0
switch# show logging nvram last 10
The following example shows how to clear messages in a log file:
switch# clear logging logfile
switch# clear logging nvram
Command or Action
switch# show logging last number-lines
switch# show logging logfile [start-time yyyy
mmm dd hh:mm:ss] [end-time yyyy mmm dd
hh:mm:ss]
switch# show logging nvram [last
number-lines]
switch# clear logging logfile
switch# clear logging nvram
Cisco Nexus 3548 Switch NX-OS System Management Configuration Guide, Release 7.x
Displaying and Clearing Log Files
Purpose
Displays the last number of lines in the logging
file. You can specify from 1 to 9999 for the last
number of lines.
Displays the messages in the log file that have
a time stamp within the span entered. If you do
not enter an end time, the current time is used.
You enter three characters for the month time
field and digits for the year and day time fields.
Displays the messages in the NVRAM. To limit
the number of lines displayed, you can enter the
last number of lines to display. You can specify
from 1 to 100 for the last number of lines.
Clears the contents of the log file.
Clears the logged messages in NVRAM.
47