Quadstick User Manual page 146

Mouse Response Curve
The three choices are:
1. Linear - the mouse movement speed is directly proportional to the joystick position
2. Mixed - the mouse movement speed is an average of the Linear and Parabolic values.
3. Parabolic - the mouse movement speed is proportional to the square of the joystick position.
Parabolic gives the user greater control over small movements of the mouse pointer while still moving
quickly for larger deflections of the joystick.
Enable Voice Commands over USB
If there is no serial connection to the Quadstick, this setting can be used for voice commands when the
Quadstick is connected to the PC. This setting overrides any serial connection.
Enable file management over serial port
If a serial connection is found to the Quadstick, via a cable or Bluetooth SPP, and the Quadstick is not
connected to the PC, turning this setting on will allow configuration file management over that serial
connection.
Enable boot in PS4 USB mode
When connecting directly to the PS4 or when using the CronusMax in "Full Crossover mode", turn this
setting on.
See USB Emulation mode 4 (PS4)
Program Message Transcript
Reload from QuadStick
and connecting to the PS4
146
for more information.