Quadstick User Manual page 145

Enable CronusMax
The QMP and CronusPro cannot both access the CronusMax Plus PCPROG port at the same time.
Turn this setting off if using the CronusPro while the QMP is open. If using the QMP to relay Quadstick
data to the CronusPro PCPROG port, this setting must turned on.
Enable select file with side tube
Enables the long hard sip on the side tube to allow the user to activate different configuration files. When
activated, a "boing" sound will be heard and the leds will flash rapidly indicating the number for the active
file. Move the joystick left-right or up-down to light up the leds for the desired file, then press the lip
button.
Speaker Voulme
Enable swap inputs with side tube
A long hard puff on the side tube allows the user to temporarily remap the lip button to the next input the
user activates. While waiting for the user to select an input, a tone will sound from the speaker. To clear
the swap, a long hard puff, followed by pushing on the lip button will restore the original mapping.
Mouse Speed
This setting controls the speed of the mouse relative to the game controller joystick. Adjust the joystick
sensitivity for use as a game controller first, then adjust this mouse speed second.
Enable Auto Zero Joystick
LED Brightness
Enable Circular Dead Zone
See the Joystick topic for a description of this setting.
145