Quadstick User Manual page 142

Commands
The text parameter is passed to the Quadstick via the serial or USB connection.
Contextual Command Section
Commands following the label will only be active when the title of the QMP contains the word before the
colon. The label must match the name of the VCH file. In this example, the VCH file is named "cod.vch"
and the contextual section begins with "cod:". Commands above the contextual section are always
available. In this example, changeTitle("cod") will change the title of the QMP to include the word "cod"
which will activate this section.
changeTitle Command
Sets the title of the QMP to include the word parameter which activates the contextual command section.
Without this command, the commands below the contextual section will not be active. Usually paired
with a "load,something.csv" command to select the associated configuration file in the Quadstick's flash.
142