Patient Therapy Management System; Using An Sd Card - DeVilbiss IntelliPAP2 DV63 Standard Plus CPAP Series Instruction Manual

DEVILBISS SMARTLINK
DeVilbiss SmartLink technology is included in every device. It is used by your provider in conjunction with our exclusive software to monitor the effectiveness of your therapy and how
consistently you use the device. Information can be obtained through the use of an SD card or by direct download to a computer with SmartLink software installed.

Using an SD Card

Your provider may give you an SD card to collect data. It should be installed during device set up and kept in device. Your provider will instruct you on when to return the card.
To install the card
1. Insert card face up.
Press until it clicks into
place.
2. Message will display
and tone will sound.
Card Detected
Ready For Use
EN - 18

PATIENT THERAPY MANAGEMENT SYSTEM

®
Data transfer
1. Device is copying
card. Card should remain
in device until copying is
complete
NOTE – DO NOT remove
SD card while showing
"Card Detected Please
Wait." SD card may be
corrupted if removed
during this message.
Card Detected
Please Wait...
To remove the card
1. Press and release card;
remove from CPAP.
2. Message will display
and tone will sound.
Card Removed
Send to Provider
A-DV64