DeVilbiss IntelliPAP2 DV63 Standard Plus CPAP Series Instruction Manual page 13

FEATURES AND SETTINGS
CPAP Settings Menus
Ramp Options
 
When activated, this feature gradually ramps up
the device to prescription pressure to help you fall
asleep easier.
1. Select Ramp
2. Choose Ramp Time.
(if unlocked).
3. Set Ramp Time

(From 0-45 minutes in 5
min increments)
A-DV64
4. View Ramp Pressure 
(set by the provider)
Humidity Settings
(Setting only applicable if you
have the optional heated
humidification.)
1. Select Humidity
2. Choose humidity
setting of OFF or 1
through 5 bars. NOTE: 5
bars is the highest
humidity.
Tubing Settings

Allows adjustment for optimal therapy based on your
tubing dimensions.
1. Select Tubing
2. Select Diameter: 15mm or 22mm
Diameter 15mm 22 mm
Length
1.8 m (6') 1.8 m (6'), 2.4 m (8'), 3.0 m (10'), 3.7 m (12')
3. Select Length if 22 mm
Diameter. NOTE: These
settings must match the tubing
you are using for pressure at
the mask to be correct.
NOTE: Refer to Replacement Items/Spare Parts section to verify
tubing diameter.
NOTE: Bacteria filter option is set by the provider.
EN - 13