Chapter 3 Driver Installation - Icop VSX-6114-V2 User Manual

C h a p t e r 3
Driver Installation
VGA
The Vortex86SX processor also use external Display chip ""Volari™ Z9s" which is an ultra low
powered graphics chipset with total power consumption at around 1-1.5 W. It is capable in
providing VGA display output upto 1600x1200. With DVO interface, developers could easily
connect flat Panel to support TFT and LVDS output.
LAN
The Vortex86SX processor integrated 10/100Mbps Ethernet controller that supports both
10/100BASE-T and allows direct connection to your 10/100Mbps Ethernet based Local Area
Network for full interaction with local servers, wide area networks such as the Internet.
I/O and IRQ settings can be done by software with the supplied utility software, or it can be set
for Plug and Play compatibility. The controller supports: Half / Full-Duplex Ethernet function to
double channel bandwidth, auto media detection.
Operating system support
The Vortex86SX-6114-V2 Tiny CPU board provides the VGA and LAN drivers for DOS 6.22
Windows CE 5.0 and Windows Embedded CE 6.0. Please get the drivers from the Driver CD
which attached with the standard packing of Vortex86SX-6114-V2 board or please get it from
DMP official website: http://www.dmp.com.tw/tech/vortex86sx/ .
Vortex86SX-6114-V2 also supports most of the popular Linux distributions, for more detail
information, please visit DMP official website: http://www.dmp.com.tw/tech/vortex86sx/.
Vortex86SX-6114-V2
Vortex86SX™ Tiny CPU Module
22