Product Description - Icop VSX-6114-V2 User Manual

1.2

Product Description

The VSX-6114-V2 family of low-power x86 embedded controller is designed to meet Tiny
specification, and integrated with the following features.
300 MHz Vortex86SX System-On-Chip
128MB DDR2 system memory
VGA, LVDS LCD support up to
1280x1024 resolution
Enhanced IDE (UltraDMA-100/66/33)
10/100Mbps Ethernet
2 USB 2.0 (host)
Up to 4 serial ports
16-bit GPIO x1
x-ISA bus
The VSX-6114-V2 Tiny family of embedded controller is designed with backward compatibility in
mind, to provide migration path for projects facing end-of-life challenges with their existing x86
based Tiny controller. The VSX-6114-V2 family of controller is designed as a plug in
replacement, with backward compatibility to support legacy software to help extend existing
product life cycle without heavy re-engineering.
VSX-6114-V2 is suitable for broad range of data-acquisition, Industrial automation, Process
control, Automotive controller, AVL, Intelligent Vehicle management devic,Medical device,
Human machine interface, Robotics, machinery control And more...application that required
small footprint, low-power and low-cost hardware with open industry standard such asTiny.
Vortex86SX-6114-V2
Vortex86SX™ Tiny CPU Module
RS-485 with Auto Direction
2 watchdog timer
Audio (Optional)
JTAG interface
AMI BIOS
2MB SPI flash
Single voltage +5V DC
Support extended operating
temperature range of -20°C to +70°C
2