Conversion To Another Type Of Gas; Jet Table; Changing The Jets - Miele CS 1018 G Operating And Installation Instructions


Conversion from one type of gas
to another should only be
undertaken by an approved and
registered gas fitter in strict
accordance with current local and
national safety and building
regulations.
Disconnect the cooktop from the
electricity supply and turn off the gas
supply.

Jet table

The jet markings refer to a ¹/₁₀₀ mm
bore diameter.
Main jet
Natural gas
ULPG

Conversion to another type of gas


Small jet
1.8/ 0.7/
0.58 (R) 0.38
1.05/ 0.6/
0.34 (E) 0.23

Changing the jets

 Disconnect the cooktop from the
electricity supply and turn off the gas
supply.
When converting to another type of
gas, both the main and small jets
need to be changed.
The upper part of the appliance has to
be removed before the jets can be
changed.
53