Miele CS 1018 G Operating And Installation Instructions page 9


The manufacturer's warranty will be invalidated if the appliance is
not repaired by a Miele approved service technician.

Faulty components must only be replaced by genuine Miele spare
parts. The manufacturer can only guarantee the safety of the
appliance when Miele replacement parts are used.

The wok burner is not intended for use with an external timer
switch or a remote control system.

Connection to the gas supply must be carried out by a suitably
qualified gas fitter. If the plug has been removed or the connection
cable is not supplied with a plug, the appliance must be connected
to the mains supply by a suitably qualified electrician.

If the mains connection cable is damaged, it must be replaced
with a special connection cable type H 05 VV-F (PVC insulated),
available from Miele, by a Miele approved service technician or
suitably qualified electrician in order to avoid a hazard. See
"Electrical connection".

During installation, maintenance, and repair work, the appliance
must be completely disconnected from the mains electricity supply.
The gas supply must also be turned off. It is only completely isolated
from the gas and electricity supply when:
– the mains circuit breaker is switched off, or
– it is switched off at the wall socket and the plug is withdrawn from
the socket. Do not pull the mains connection cable but the mains
plug to disconnect your appliance from the mains electricity
supply.
– the gas inlet valve is closed.

Danger of electric shock!
Do not use the appliance if it is faulty. Switch it off immediately,
disconnect it from the mains electricity and gas supply and contact
Miele.
Warning and Safety instructions
9