Miele CS 1018 G Operating And Installation Instructions page 33

Problem
The flame suddenly
looks different.
The gas flame goes out
during operation.
The ignitor on the
burner does not spark.
Possible cause and remedy
The burner parts are not positioned correctly.
 Position the burner parts correctly.
The burner head or the holes in the burner cap are
dirty.
 Remove any soiling.
The burner parts are not positioned correctly.
 Position the burner parts correctly.
There has been a power outage.
 See "Operation - "Switching on during a power
outage".
The mains circuit breaker has tripped.
 You may need to contact a qualified electrician or
Miele.
There is food residue stuck between the ignitor and
the burner cap.
There is food residue on the ignition safety device.
 Remove any soiling (See "Cleaning and care").
Problem solving guide
33