Attach Pouches To The Test Fixture - Keithley 8010 Reference Manual

Attach pouches to the test fixture

Before installing the test fixture, attach the pouches (part number
8010-318) to the sides of the fixture, as shown here.
One pouch can be used to store the Interconnection Reference
Guide and the other can be used to store Model 8010 cables and
accessories.
To attach the pouches:
1. Make sure that the areas to which you want to attach the pouches
are clean. If you need to clean the test fixture, use a soft, lint-free
cloth and 70 percent isopropyl alcohol.
2. Close the lid of the test fixture.
3. Remove the protective backing from the hook and loop fastener
strips.
4. Position the pouch. Make sure placement of the pouch does not
interfere with the closing of the lid or your ability to use the
handles.
5. Press firmly.
8010 placement considerations
The Model 8010 is intended for use on a bench. Make sure you have
enough clearance to open the lid.