Network Connection; Serial Connection; Figure 2.13 Ethernet Plug & Connector Pin Position; Figure 2.14 Db9 Pin Assignment - Advantech EKI-1360-BE Series User Manual

2.2.4

Network Connection

For RJ45 connectors, data-quality, twisted pair cabling (rated CAT5 or better) is
recommended. The connector bodies on the RJ45 Ethernet ports are metallic and
connected to the GND terminal. For best performance, use shielded cabling.
Shielded cabling may be used to provide further protection.
Straight-thru Cable Wiring
Pin 1
Pin 2
Pin 3
Pin 6
Maximum cable length: 100 meters (328 ft.) for 10/100BaseT.
2.2.5

Serial Connection

EKI-1360-BE Series provides up to four ports DB9 (male) connectors. RS-232/422/
485 pin assignments as below:
Pin 1
RS-232 DCD
RS-422 TX-
RS-485 DATA-
Cross-over Cable Wiring
Pin 1 Pin 1
Pin 2 Pin 2
Pin 3 Pin 3
Pin 6 Pin 6
Figure 2.13 Ethernet Plug & Connector Pin Position
1
6

Figure 2.14 DB9 Pin Assignment

2 3 4
RX TX DTR
TX+
DATA+ GND
Pin 3
Pin 6
Pin 1
Pin 2
8
1
5
9
5 6 7
GND DSR RTS
GND RX+
16 EKI-1360-BE Series User Manual
8 9
CTS RI
RX-