5.
Locate From System Port and click the drop-down menu to select the target
COM port.
6.
From the network address list, select the address options to map.
The selected address displays the Device Port and (EKI-1360-BE Series device
server physical serial port) and the system port which will be the VCOM port for
the PC.
7.
From the network address list, select the address options to map.
8.
Click Map Selected Ports to set the configuration.
Once the mapping function is initialized, a successful mapping process results in the
virtual mapping of the designated physical serial port and VCOM PC port. See the
following figure.
EKI-1360-BE Series User Manual
Selected Options
Figure 5.2 Selecting Auto Mapping
Figure 5.3 Mapping Selected Ports
Figure 5.4 Viewing VCOM Mapping Results
System Port
Device Port
45