To access this page, click Alarm > Event.
The following table describes the items in the previous figure.
Item
System Event
Cold Start
Warm Start
Authentication failure
IP address changed
Password changed
LAN Interface 1 link
down
DCD changed
Port
DSR changed
Port
Apply
EKI-1360-BE Series User Manual
Figure 6.18 Alarm > Event
Description
Click the option to select a warning type when the device server's
power is cut off and reconnected.
Click the option to select a warning type when the device server is
reboot.
Click the option to select a warning type when an incorrect
password is entered.
Click the option to select a warning type when the IP address is
changed.
Click the option to select a warning type when the password is
changed.
Click the option to select a warning type when the LAN Interface 1
port is disconnected.
Click the option to select a warning type of the selected port when
a change in the DCD (Data Carrier Detect) signal indicates that the
modem connection status has changed.
Click the option to select a warning type of the selected port when
a change in the DSR (Data Set Ready) signal indicates that the
data communication equipment is powered off.
Click Apply to save the values and update the screen.
71