Table of Contents
Advertisement
Ethernet Screen
When the Ethernet Screen opens, the printer will attempt to establish a connection with
the network. If it fails to find a network, it will prompt you to connect the printer to the
network using an Ethernet cable. Once a connection is established, the screen will indicate
that the connection was successful.
Touch the Back icon to return to the Main Menu.
Preheat Menu
Touch the sliders next to the Extruder and Platform
entries to turn Preheating on or off. Preheating is on
when the white ball is to the right and off when it is
to the left.
Touch the － icon to decrease the displayed value.
Touch the + icon to increase the displayed value.
The maximum temperature for the Extruder is 250°C and the maximum
temperature for the Platform is 100°C.
16
Advertisement
Table of Contents
