Memory Devices - Tektronix MDO4104C Declassification And Security Instructions

Clear and Sanitize Procedures

Memory Devices

Table 1: Volatile memory devices
Type and minimum
size Function
CMOS, SDRAM, Contains
128 Mbit x 16, 8 devices, waveform
2 Gb ea, 16 Gb total, main
DDR2, 1.8 V, 400 MHz data
(Effective 800 MHz); during
MT47H128M16RT-25E, operation
BGA
1
CMOS, SDRAM, Contains
64 Mbit x 16, 8 devices waveform
1 Gb ea, 8 Gb total, main
DDR2, 1.8 V, 400 MHz data
(Effective 800 MHz); during
MT47H64M16HR-25E operation
BGA
2
CMOS, SDRAM, Contains
64M x 16, 1024 Mb instrument
DDR2, 1.8 V, 400 MHz code
(Effective 800 MHz); and
MT47H64M16HR-25E data
during
3
operation
CMOS, SDRAM, Contains
64M x 16, 1024 Mb display
DDR2, 1.8 V, 400 MHz images
(Effective 800 MHz); during
MT47H64M16HR-25E operation
4
CMOS, DRAM; Contains
4M X 32,128 Mb, code for
SDRAM, 3.3 V; digital
MT48LC4M32B2B\5-7, waveform
90-BALL FBGA processor
(11 MM X 13 MM),
DS4
2
The following tables list the volatile and nonvolatile memory devices in the
standard instrument and listed options. Detailed procedures to clear or sanitize
these devices, if any, are shown following each table.
Type Method
of user Backed of
info up by modifi-
stored battery cation
Both No Indirect
Both No Indirect
Both No Indirect
Both No Indirect
None No Indirect
Data input
method Location
Front panel control Main
and oscilloscope Acquisition
input channels board
Front panel control Main
and oscilloscope Acquisition
input channels board
Front panel control Main
and oscilloscope acquisition
input channels. board
Data inputs through
USB port and
Ethernet port.
Front panel control Main
and oscilloscope acquisition
input channels. board
System Main
acquisition
board
Declassification and Security Instructions
User To clear or
accessible sanitize
No Remove
power
from the
instrument
for at least
20 seconds
No Remove
power
from the
instrument
for at least
20 seconds
No Remove
power
from the
instrument
for at least
20 seconds
No Remove
power
from the
instrument
for at least
20 seconds
No Remove
power
from the
instrument
for at least
20 seconds