Preface - Tektronix MDO4104C Declassification And Security Instructions

Preface

Reference
Declassification and Security Instructions
If you have data security concerns, this document helps you to sanitize or
remove memory devices from the Tektronix MDO4000C Series Mixed Domain
Oscilloscopes and Modules.
The MDO4000C Series products have data storage (memory) devices and data
output devices (USB ports). These instructions tell you how to clear or sanitize
the memory devices, and also tell you how to declassify an instrument that is not
functioning.
Instrument code and calibration settings reside in nonvolatile flash memory.
Instrument setups and reference waveforms may also be stored in flash memory or
on USB drives connected to the instrument.
If you have any questions, contact the Tektronix Technical Support Center at
www.tektronix.com/support.
The procedures in this document are written to meet the requirements specified in:
NISPOM, DoD 5220.22–M, Chapter 8
ISFO Process Manual for Certification & Accreditation of Classified Systems
under NISPOM
iii