Table of Contents
Advertisement
Installation and operation manual
EN
10. Decommissioning
To decommission the drying system, disconnect it from the mains power supply and close the shut-off valves.
If only the mains power supply is interrupted, then the drying system will continue to operate in fail-safe mode. This will
therefore mean that the entire purge air volume will be continuously consumed.
11. Dismantling and disposal
Before dismantling the drying system, disconnect it from the mains power supply and dismantle it in the reverse order to
the assembly sequence.
All associated parts and operating media must be disconnected on the DRYPOINT
M eco control and disposed of as special
®
waste.
Disposal must be professional and environmentally sound as well in accordance with the current, valid regional and national
provisions.
Spent filter element:
Waste key: 150203
Adsorption and filter materials; cleaning wipes and protective clothing with the exception of those classified by 150202
Spent float drain-off conduit
Do not dispose of as household waste! Disposal must be executed as professional and environmentally sound.
48
DRYPOINT
M eco control
®
Advertisement
Table of Contents
