Table of Contents
Advertisement
Installation and operation manual
9. Remedying malfunctions, errors, faults and troubleshooting
9.1. Behaviour in the event of malfunctions/errors, faults
Errors and faults in the functions or damages should be compared with the possible following listed cause of errors in the
FAQ section. If necessary, contact the manufacturer for advice.
9.1.1. Failure of the voltage power supply
In the event of a voltage power failure, the solenoid valve opens so that the purge air flow is unrestricted.
As soon as the voltage power supply is reinstated, the DRYPOINT
with the previously applicable settings.
9.1.2. Sensor failure
The sensor detects the failure or the fault by the sensor: red LED illuminates permanently.
•
Power LED: continuously shows the operating mode
•
Value LEDs: continuously show the set value
44
M eco control switches back to normal operating mode
®
DRYPOINT
M eco control
®
EN
Advertisement
Table of Contents
