CTC Union IGS-1608SM-SE Quick Installation Manual

Introduction
IGS-1608SM-SE models are managed industrial grade Gigabit switches with
time synchronization features (SyncE & IEEE 1588 PTPv2) that provide stable and
reliable Ethernet transmission. Housed in rugged DIN rail or wall mountable
enclosures, these switches are designed for harsh environments, such as industrial
networking and intelligent transportation systems (ITS) and are also suitable for
many military and utility market applications where environmental conditions
exceed commercial product specifications. IGS-1608SM-SE models also provide Hi-
pot isolation protection for Ethernet ports and power that can protect your
devices from damages caused by unexpected surges. Standard operating
temperature range models (-10°C~60°C) and wide operating temperature range
models (-40°C~75°C) are available to fulfill the special needs of industrial
automation applications.
Package List
 IGS-1608SM-SE device with terminal block
 Console cable (RJ-45 to D-B9)
 Din Rail with screws
 Quick Installation Guide
 CD (User Manual, Smart Config, MIB File)
 Protective caps for SFP ports
Features
 Redundant dual 12/24/48VDC or -48VDC power
 Support negative power input with isolated RS-232 console port
 IP30 rugged metal housing & fanless
 Wide temperature range -40°C~75°C (IGS-1608SM-SE-E)
 Support SyncE & IEEE1588 PTPv2 for precise time synchronization
 Console, Telnet, Web and SNMP management
 4KV surge protection for UTP & fiber ports
 2.25K VDC Hi-pot isolation protection for Ethernet ports and power
 UL60950-1, Railway Traffic EN50121-4, EMS & EMI for heavy industrial
environment EN61000-6-2 & EN61000-6-4
Specifications
Ethernet Interface
 Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T)
 RJ-45 (shielded) Ports: 16
 Speed: 10/100/1000M (Auto)
Optical Interface
 Standards: IEEE80802.3u (100Base-FX), 802.3z (1000Base-X)
 SFP-based slots: 8
 Speed: 100/1000M (Manual)
 SFP slots support dual speed and DDMI function.
Switch Features
 Store & Forward Switch
 Supports IEEE802.3x Flow Control
 Auto MDI/MDI-X
 Duplex: Full/Half (Auto-negotiation per IEEE802.3u)
 Switching Fabric: 48Gbps (Non-blocking)
 Memory Buffer: 512K Bytes
 MAC Table: 8K
 MTU: 9600 bytes
Specifications (cont.)
Power
 Absolute Input Range: 12/24/48VDC (9.6V~60VDC), -48VDC
 Support negative power input with isolated RS-232 console port
 Support Power Input Reverse Polarity Protection
 Support Dual Power Inputs
 Removable terminal block connectors
 Power Consumption: 17W (12V), 17.8W (24V), 20.2W (48V)
Mechanical
 Water & Dust Proof: IP30 Protection
 Dimensions:
116 mm (D) x 91 mm (W) x 157 mm (H)
 Mounting: DIN-Rail, Wall Mount (Optional)
 Weight: 1,375 g
Environmental
 Operating Temperature: -10°C~60°C; -40°C~75°C (IGS-1608SM-SE-E)
 Storage Temperature: -40°C~85°C
 Humidity: 5%~95% (Non-condensing)
Certifications
 CE, FCC
 Railway Traffic: EN50121-4
 Immunity for Heavy Industrial Environment: EN61000-6-2
 Emission for Heavy Industrial Environment: EN61000-6-4
 EMS (Electromagnetic Susceptibility) Protection Level:
 EN61000-4-2 (ESD) Level 3, Criteria B
 EN61000-4-3 (RS) Level 3, Criteria A
 EN61000-4-4 (Burst) Level 3, Criteria A
 EN61000-4-5 (Surge) Level 3, Criteria B
 EN61000-4-6 (CS) Level 3, Criteria A
 EN61000-4-8 (PFMF, Magnetic Field) Field Strength: 300A/m, Criteria A
 4KV surge protection for UTP & fiber ports
 Safety: UL60950-1
 Hi Pot Protection: DC 2.25KV for power to chassis ground, Ethernet ports to
chassis ground
 Shock: EN60068-2-27
 Freefall: EN60068-2-32
 Vibration: EN60068-2-6
 MTBF (MIL-HDBK-217): 431,610 Hours
Panels
5 4 2
3
6
7
1
Figure 1. Front Panel
www.ctcu.com
- 1 -
6
7
Figure 2. Top Panel
- 2 -
Quick Installation Guide
IGS-1608SM-SE
Industrial 16 x 10/100/1000Base T(X) + 8 x 100/1000Base-X SFP Slots with
SyncE Managed Ethernet Switches
CTC Union Technologies Co., Ltd.
Far Eastern Vienna Technology Center
(Neihu Technology Park)
8F, No. 60, Zhouzi St., Neihu District, Taipei 114
Taiwan
To download this QIG or a more complete user manual, please visit
http://www.ctcu.com/Industrial/
© 2017 CTC Union Technologies Co., Ltd.
All trademarks are the property of their respective owners.
Technical information in this document is subject to change without notice.
No. Description
1 UTP RJ-45 ports
2 Fiber optic SFP slots
3 Console port (RJ-45 to DB-9)
4 LAN & Fiber LED indicators
Connections
LAN and Fiber Connection
IGS-1608SM-SE models have 16 UTP LAN ports (labeled 1~16) and 8 fiber ports
(SFP based, labeled Fiber 17~24) on the front panel. The LAN ports that utilize
shielded RJ-45 connectors support 10/100/1000M; while the fiber SFP ports
support 100/1000M.
Console Port
The RJ-45 port labeled "Console" is an RS-232 terminal port for local
management. These models use a CLI (Command Line Interface) in addition to a
user friendly Web interface and industry standard SNMP. See page 6 for basic CLI
and Web operation.
One RJ-45 to DB-9 cable is provided with this device. Console port pinouts and
RS-232 DB-9 connector are illustrated below together with RJ-45 to DB-9 signal
mapping information. Use the supplied cable to connect the RJ-45 Console port to
a console PC.
Figure 3. Console Port Pinout
RJ-45 to DB-9 Signal Mapping
DB-9 (Female)
Direction
Signal Pin
RXD 2
TXD 3
GND 5
The dual power supplies of this device are completely isolated which means
your PC management device connected via the console port will not be damaged
while the device is powered up using negative -48VDC power.
Figure 5. RS-232 Port with Isolation Protection
T +886-2-26591021
F +886-2-26590237
E sales@ctcu.com
No. Description
Power, Ring, CPU ACT, Fault
5
LED indicators
6 Terminal block
7 Earth grounding connection
Figure 4. RS-232 (Female) Pinout
RJ-45
Pin Signal
3 TXD
6 RXD
5 GND
Isolated
RS-232 Port
No Damage!
V1.2
- 3 -