Related Manuals for CTC Union IGS-2408SM-24PH
Summary of Contents for CTC Union IGS-2408SM-24PH
- Page 1 Quick Installation Guide IGS-2408SM-24PH IGS-2408SM-24PHE 24 x 10/100/1000Base-T(X) + 8 X 100/1000Base-X SFP with 24 x PoE+ Managed Switch sales@ctcu.com...
- Page 2 8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2020 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
- Page 3 CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.
-
Page 4: Table Of Contents
Table of Contents Introduction .................. 5 Package List ................. 5 Features ..................5 Access to Command Line Interface (CLI) ........6 ..................6 ONSOLE ONNECTION /SSH C ..................7 ELNET ONNECTION Access to Web-Based Management Interface ......8 Specifications ................9 .................... -
Page 5: Introduction
Introduction IGS-2408SM-24PH(E) are industrial grade managed Gigabit PoE (Power over Ethernet) switches with 24 x 10/100/1000Mbps RJ-45 (with Power over Ethernet function) + 8 x 100/1000Mbps SFP. Housed in rugged enclosures, these switches are designed for harsh environments where environmental... -
Page 6: Access To Command Line Interface (Cli)
Access to Command Line Interface (CLI) IGS-2408SM-24PH(E) models are managed Gigabit PoE switch devices. Initial configuration (assignment of IP address) may be accomplished via the RS-232 console and a PC or laptop running terminal emulation software or via RJ45 Ethernet port running Telnet or SSH. -
Page 7: Telnet/Ssh Connection
Telnet/SSH Connection To use Command Line Interface (CLI), you can also choose to access the device through a Telnet/SSH connection via TCP/IP network over Ethernet ports. For initial operation, use the default TCP/IP settings (10.1.1.1) to login to the device. Default TCP/IP settings: IP Address: 10.1.1.1 Subnet Mask: 255.255.255.0... -
Page 8: Access To Web-Based Management Interface
Access to Web-Based Management Interface To enter the web-based management interface for the first time or after returning the device back to factory defaults, input the default IP 10.1.1.1 address “ ” in your web browser. Then, a standard login prompt will appear depending on the type of browser used. -
Page 9: Specifications
Specifications Ethernet Interface Standards: IEEE802.3 (10Base-T), 802.3u (100Base-TX), 802.3ab (1000Base-T) RJ-45 (shielded) Ports: 24 ports Speed: 10/100/1000M (Auto) Optical Standards: IEEE80802.3u (100Base-FX), 802.3z (1000Base-X) SFP-Based Slots: 8 slots Speed: 100/1000M (Manual) dual speed SFP slots support DDMI function Switch Features ... -
Page 10: Mechanical
Water & Dust Proof: IP30 Protection Dimensions: 280 mm (D) x 440 mm (W) x 44 mm (H) Mounting: 19" Rack Mounting Weight: 4.26 kg Environmental Operating Temperature: -10°C~60°C (IGS-2408SM-24PH), -40°C~75°C (IGS-2408SM-24PHE) Storage Temperature: -40°C~85°C Humidity: 5%~95% (Non-condensing) Certifications ... -
Page 11: Panels
Panels Figure 1. Front Panel Figure 2. Rear Panel Description UTP RJ-45 ports Fiber optic SFP slots Console port (RJ-45 to DB-9) Power, Ring, ACT, ALM LED indicators Link/ACT & Speed LED indicators for UTP RJ-45 & fiber optic ports PoE LED indicators DC power supply Alarm terminal block... -
Page 12: Lan And Fiber Ports
LAN and Fiber Ports IGS-2408SM-24PH(E) switches have 24 electrical LAN ports (labeled 1~24) and 8 fiber ports (SFP based, labeled 25~32) on the front panel. The LAN ports that utilize shielded RJ-45 connectors support 10/100/1000M; while the fiber SFP ports support 100/1000M. -
Page 13: Console Port
CONSOLE Port The RJ-45 port labeled “CONSOLE” is an RS-232 terminal port for local management. These models use a “light” CLI (Command Line Interface) in addition to a user friendly Web interface and industry standard SNMP. One RJ-45 to DB-9 cable is provided with this device. CONSOLE port pinouts and RS-232 DB-9 connector are illustrated below together with RJ-45 to DB-9 signal mapping information. -
Page 14: Alarm Relay Connection
Alarm Relay Connection The alarm relay contact can be wired into an alarm circuit which senses an alarm condition when the contact is broken. The alarm relay is normally closed when there is no alarm condition. The alarm conditions are user programmable through management to include power, link faults or other fault conditions. -
Page 15: Led Indicators
LED Indicators Color Status Definition Power is connected and active at the PWR1/PWR2 input terminal PWR1 Green connection. PWR2 PWR1/PWR2 is not connected. When one or more of the Amber programmable alarm conditions is active. ACT/ALM During normal use, this LED will be Green lit, indicating a healthy condition of the running CPU. -
Page 16: Installation
Installation The Gigabit Ethernet switch comes with rack-mounting hardware brackets. When installing the rack-mounting brackets, be sure to correctly align the orientation pin. Use the screws provided in the rack- mounting kit to securely fasten the brackets. Figure 9. Attaching Rack-Mounting Brackets Figure 10. -
Page 17: Application
Application Figure 12. Network Application... - Page 18 Version Date Description 2020/9/25 Use new document format...