Table of Contents
Advertisement
ELECTRICAL SYSTEM
Checking the headlight setting
13.6
A
0 0 A
Tip
The replacement fuses should always be present in the fuse box to make sure
they are available when needed.
–
Close the cover of the fuse box.
–
Install the front cover. (
–
On a light-colored wall with a horizontal area in front of it, make a mark at the height of
the center of the headlight.
–
Make another mark a distance
Guideline
Distance
0 0 B
B
–
Position the vehicle a distance
–
Now the rider, wearing a full set of protective clothing, sits on the vehicle in the normal
sitting position (feet on the footrests).
400778-10
Guideline
Distance
–
Switch on the low beam. Check the headlight setting.
The boundary between light and dark must be exactly at the lower mark when the
vehicle is operational and complete with a rider.
»
If the boundary between light and dark does not meet specifications:
–
Adjust the headlight range of the headlight. (
p. 93)
under the first mark.
5 cm (2 in)
vertically in front of the wall.
5 m (16 ft)
156
p. 157)
Advertisement
Table of Contents
