Table of Contents
Advertisement
TUNING THE CHASSIS
Info
The cross over setting is used to adjust the suspension travel of the short (soft) spring.
Greater cross over makes the spring action at the front softer and the front of the vehicle lies lower. The suspension travel and the
progressive part of the long (hard) spring is not fully utilized.
Less cross over makes the spring action at the front harder and the front of the vehicle lies higher.
0 0 0
4
B
B
3
–
Adjust the spring preload for the front shock absorbers. (
–
Raise the vehicle with the lifting gear. (
–
Clean the shock absorber thoroughly.
–
Loosen adjusting rings
Hook wrench (83019001000)
100084-10
–
The cross over setting
spring retainer
Guideline
(Option: KT 770...)
Cross over
(Option: KT 870...)
Cross over
–
Change the settings accordingly and lock the adjusting ring.
400348-11
p. 88)
and
.
is measured between sliding bushing
.
p. 74)
and the collar of
17±1.5 mm (0.67±0.059 in)
14±1.5 mm (0.55±0.059 in)
77
Advertisement
Table of Contents
