BRAKES
–
Press the brake caliper onto the brake disc by hand in order to push back the brake pis-
ton.
601054-01
–
Loosen the screw
the screw by approx. 10 turns and use the screw to press the bearing bolt out of the
brake caliper. Remove screw.
601055-10
Note
Danger of damage Kinking of brake line.
–
Position and handle the brake line without straining it. The brake line must be
replaced if it is kinked.
–
Swing the brake caliper up, unhook it from the brake caliper support
–
Remove the brake linings
–
Clean brake caliper and brake caliper support.
601056-10
while holding the hexagonal head
.
of the bearing bolt. Unscrew
and set it down.
143