TUNING THE CHASSIS
Info
Increasing the spring preload raises the center of gravity of the vehicle. This can have a large impact on vehicle handling.
Tip
Before changing the spring preload, make a note of the present setting, e.g., by measuring the length of the spring.
–
Remove the rear shock absorber.
–
After removing the shock absorber, clean it thoroughly.
–
Release lock nut
Hook wrench (83019002000)
Info
Do not loosen lock nut
–
Turn the adjusting ring until the spring is no longer under tension.
100082-10
x
(
p. 88)
while holding adjusting ring
at the top of the shock absorber.
.
82