MAINTENANCE WORK ON THE CHASSIS
–
Loosen nuts
600128-10
–
Remove screws
600126-10
–
Insert tool
Camber gauge (83019014000)
–
Check the camber on both heim joints.
»
If marking
–
Turn tool
with the top edge of the A-arm.
–
Remove tool
600127-10
.
with bushings
.
in the heim joint and clip onto the A-arm.
is not aligned with the top edge of the A-arm:
with the heim joint in steps of 180° until the marking is in line
.
112