Ups Configuration Screen - Review Settings Menu - Liebert Nfinity User Manual

UPS Configuration Screen - Review Settings Menu

Follow this procedure to review your UPS configuration settings. Starting at the Main Menu, select UPS
Configuration and press
factory default values.
Main Menu
UPS Status
> UPS Configuration
Display Date/Time
Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools
UPS Configuration
UPS Configuration
> Review Settings
Change Settings
Service Mode
Review Settings
Voltage
Frequency
Battery
Alarms
Service Contact
Auto Restart
UPS Shutdown Delay
Remote Shutdown
External Battery
Bypass Alarm Mode
Intelli-Battery Cab
Air Filter Reminder
. Next, select Review Settings and press
Voltage Settings
Voltage Settings
Input 230 LNE
Frequency Settings
Frequency Settings
Frequency Hz: 50
Sync Range Hz: +/- 5.0
Slew Range Hz/S: 3.0
Battery Settings
Battery Settings
Test intrvl weeks: 2
on Wed 06:00
Low Batt Warn min 02
Alarm Settings
Alarm Settings
Redundant Alarm:
Enabled/Disabled
Max Load: xx.x/(Disabled
Service Contact
Service Contact
Liebert Corporation
WWW.LIEBERT.COM
Auto Restart
Mode: Enable/Disable
Batt % 25%
Delay 10
. Any underlined text indicates
UPS Shutdown Delay
Remote Shutdown
External Battery
Bypass Alarm Mode
Intelli-Battery Cab
Air Filter Reminder
26
UPS Shutdown Delay
120 seconds
Remote comm shutdown
Mode: Enable
External Battery Config
Amp.Hr 0000
Charge (A)00.0
Bypass Alarm Mode
Mode: Enable
Intelli-Batteries
0
Air Filter Reminder
Mode:xx weeks/Disabled