Section 9: Installing The Accessories; Hlb34 Installing The Firestones Or Optional Fireglass; Hlb34-2 Installing Speckled Stones; Hlb34-2 Installing Driftwood - Montigo H34DF Installation & Maintenance Manual

Section 9: Installing the Accessories

HLB34 Installing the Firestones or
optional Fireglass
The unit is supplied with firestones. Optional fireglass may be purchased
from the dealer. Remove the Door as shown in the previous Instruction.
Once the glass door is removed place the firestones randomly across
the pan and the burners as described in Figure 21 to 21.b
Note: Only cover the burner with one layer of firestones or fireglass.
Figure 21. spreading out firestones
Figure 21.b Completed firestone installation

HLB34-2 Installing Speckled Stones

[RR***SS]
Once the glass door has been removed as shown in the previous section,
place the speckled stones evenly across the pan and burner. Ensure
stones do not overlap too much as this will effect the flame pattern,
see figure 21.c DO NOT cover the pilot with stones.
Figure 21.c Completed Speckled Stone installation
WARNING: This appliance is intended for use only with the included
Montigo burners and accessories. Never install or add any additional
or alternative media, rock wool or other material in this appliance. The
use of additional or alternative materials may pose potential safety
hazards, damage to the appliance, and void manufacturer's warranty.
26

HLB34-2 Installing Driftwood

[LGS59]
Once the glass door has been removed as shown in the previous
section, place the driftwood logset as shown across the pan. Ensure
logs do not overlap too much as this will effect the flame pattern, see
figure 21.d DO NOT cover the pilot with logs.
Figure 21.d Completed Speckled Stone installation
Installation
XG0146 - 180405