PCE Health and Fitness PCE-950 User Manual page 13

Function
Save Average
Delete Single
Cal. Average
MemoryManager
View From No.1
View From End
View From No.
Print
Delete By No.
Delete All
Exit
11.1 Save Average
This function is used to save the current average value. This function is only available if you have
made as many measurements as previously set under Test Set – Average or via the
"Cal.Average" function that stops the measurement immediately.
11.2 Delete Single
If you wish to delete the displayed measured value or average value, go to "Delete Single", use
the arrow keys to select "Yes" or "No". The latter applies if you decide not to delete the value.
11.3 Cal. Average
This function is to calculate the average value and to terminate the test.
11.4 Memory Manager
Use the MENU/OK key to go to the main menu.
Description
Savest he measured average.
Deletes individual data measured to
calculate the average.
Calculates the average of individual
measurement results.
All measured values (averages)
All measured values from new to old
Here you can set what measurements you
want to view.
Function not yet available
Here you can delete certain measurements
All measured data are deleted from the
memory
© PCE Instruments
11