Table of Contents
Advertisement
INSTALLATION
2
INSTALLATION
Lynx™ Bt can operate according to two different installations:
•
Lynx™ BT paired with OM-1000 BT cradle (see par. 2.1);
•
Lynx™ BT communicating with a Bluetooth
par. 2.2).
The green LED and / or the beeper always indicate the reader radio connection
status (see par. 10.1):
−
the radio connection is signaled by the green LED through a single blink at
regular intervals, while if the reader radio is disconnected the LED emits two
short blinks at regular intervals;
−
during the initialization procedure, if the radio connection attempt is successful,
the reader emits four ascending tones;
−
the radio disconnection is signaled by four descending tones.
2.1
OPERATING LYNX™ BT WITH OM-1000 BT
To begin using your Lynx™ BT reader you must charge the Lynx™ BT battery
using OM-1000™ BT as described in par. 1.2. A full charge takes about 3.5
hours with Li-Ion batteries.
The Lynx™ BT, paired with an OM-1000 BT cradle, builds a Cordless Reading
System for the collection, decoding and transmission of barcoded data.
®
device as Master or as Slave (see
2
5
Advertisement
Table of Contents
