George Foreman GR82B george Jr. Owner's Manual page 14

Preparing for Use
Skewers
NOTE: Use Skewers with the Rotisserie Bar Assembly only. Do
not attempt to use Skewers in any other manner.
1. Load food onto the skewers.
2. Place the End Wheel with
Thumb Screw onto the center
bar of the Rotisserie Bar
Assembly. Align the locking
device on the End Wheel with
the guide lines on the center
bar of the Rotisserie Bar
Assembly. Tighten thumb screw
to lock in place. See Figure 7.
3. Hold one Skewer with the
hooked end of the Skewer fac-
ing to the left. Place the Skewer
in a notched cut out in the End
Wheel with Thumb Screw and
align the tip of Skewer with the
hole in the raised tab on the
End Wheel (with gear).
4. Squeeze and press down on
the top of the Skewer until it
snaps firmly into place. See
Figure 8. Repeat for remaining
Skewers.
5. WITHOUT TURNING THE
ROTISSERIE ON YET, use
the Cover Handles to raise the
Cover.
6. Hold the Rotisserie Bar
Assembly so the End Wheel
with the gear faces to the right.
Slide the Rotisserie Bar into the
Rotisserie along the Rotisserie
Bar Assembly Track. Make sure
each end of the Rotisserie Bar
Assembly drops into the center
grooves of the Rotisserie Bar Track.
14
(Cont.)
THUMB SCREW
GUIDE
LINES
Figure 7
Figure 8
"SQUEEZE"