Assemble Drip Tray; Insert Reflector - George Foreman GR82B george Jr. Owner's Manual

Preparing for Use
5. WITHOUT TURNING THE
ROTISSERIE ON YET, use
the Cover Handles to raise the
Cover.
6. Hold the Rotisserie Bar
Assembly so the End Wheel
with the gear faces to the
right. Slide the Rotisserie Bar
into the Rotisserie along the
Rotisserie Bar Assembly
Track. See Figure 1. Make
sure each end of the center
Bar Assembly drops into the
center grooves of the Rotisserie
Bar Track.

Assemble Drip Tray

1. If not in place, slide Drip Tray
into position as shown in
Figure 2.

Insert Reflector

1. Grasp the Handle and slide the
Reflector behind the Heating
Elements. See Figure 3. Make
sure the notches hook over the
Heating Element brackets. The
bottom of the Reflector must
angle over the Drip Tray.
12
(Cont.)
Figure 1
Figure 2
Figure 3