Important Safety Instructions - Aidcall Touchsafe Pro Installation Manual

2. IMPORTANT SAFETY INSTRUCTIONS
Read and understand these instructions before use. Keep these instructions for future reference.
Take care when working on step ladders during installation or service.
Do not disassemble this product or attempt to repair it yourself.
No user serviceable parts inside. Refer all servicing to qualified service personnel.
This product should only be powered by a separate 12V DC battery backed PSU.
Danger of explosion if the PSU rechargeable battery is incorrectly replaced. Use only manufacturer
approved battery as identified in this manual. Refer replacement to qualified service personnel.
This product should be located at least 2 metres away from other electronic equipment. Failure to
provide this separation may result in reduced radio range.
Do not locate this product above a radiator or other heat source.
Do not expose to direct sunlight.
Do not submerge in water and do not use in damp or humid conditions.
Do not expose this product to dripping or splashing water.
Liquids can cause a failure and/or a fire hazard.
Clean with a hard‐surface disinfectant wipe or a damp cloth and a non‐abrasive cleaning product.
Polish with a dry duster. DO NOT use a wet cloth.
Avoid using harsh, abrasive or corrosive cleaning agents or detergents (e.g. scouring powders, bleaches,
polishes, etc.) when cleaning this product.
At the end of its life this product should be disposed of and recycled in accordance with the
environmental regulations. See the Regulatory Information in section 3 below.
CONTENTS
Doc No. FM5565 issue B Page 3