Device Information - Projecta SC300D Instruction Manual

Operational tips:
upward and downward, while
interfaces left and right.

Device information

The product model, parameters and SN code of the controllers are displayed below:
1. Product type
Rate. Vol: XX V
Char. Cur: XX A
Disc. Cur: XX A
Operational tips:
upward and downward.
Test operation
Load switch test operation is conducted on the connection solar controller to see if
the load output is normal. The test operation does not affect the working settings
under actual load, which means that the solar controller will exit from the test
mode when exiting the operational interface of the test.
Test Operation
Product Type: ON/OFF
Operational tips: Enter the page and input correct password; use
modify the ON/OFF status values, while use
and cancel the test operation.
8
and buttons are respectively used to turn the browse page
and buttons are respectively used to turn the
2.
and buttons are respectively used to turn the browse page
Product type
SN: 16 Digit code
and buttons respectively to confirm
and buttons to