Surface Mount Installation - Projecta SC300D Instruction Manual

INSTALLATION
Frame Mount Dimensions
Mechanical
parameter
Overall
dimension
Mounting
dimension
Terminal

Surface Mount Installation

Step1: Locate and drill screw holes based
on the frame mounting dimension
of the base, and erect the plastic
expansion bolts.
Step 2: Use four ST4.2×32 self-tapping screws
to fix the Frame.
Step 3: Use four M4×8 pan head screws to
mount the frame to the surface.
Step 4: Mount the four associated screw plugs
into the screw holes.
Flush Mount Installation
Step 1: Locate and drill screw holes based on
the installation size of the surface.
Step 2: Use four M4×8 cross recessed pan
head screws with M4 nuts to mount
the remote control unit to the
chosen surface.
Step 3: Mount the four associated white
screw plugs into the screw holes.
Note: Take full consideration of the plugging/
unplugging space of the communication cable
and the length of the cable during installation
to see if they are appropriate.
Parameter
114 x 114 x 32.7mm
4.49 x 4.49 x 1.29 inches
88.6x 88.6mm
3.49 x 3.49 inches
4.3
114
36.1
(4.49)
(1.42)
32.7
(1.29)
88.6 114
(3.49) (4.49)
3