Table of Contents
Advertisement
Device parameter
The software version information of solar charge controller could be checked via the
page of device parameters, and device data like device ID, device LCD backlight time
and device clock could be checked and modified. The page of device parameter in the
diagram below:
1.
Device Parameter
Ver: VX.XX+VXZ.XX
ID: XXX
Note: the bigger the ID value of the connection device, the longer the Meter
communication identification interval (the maximum interval<6 minutes).
Type
Notes
Ver
Solar charger controller software and hardware version numbers.
ID
Solar charger controller communication ID numbers.
Bklight
Solar charger controller LCD backlight working time.
Month-Day-Year
Solar charger controller internal clock.
H:M:S
Device password
The password of the solar charge controller could be modified via the page of device
password; the device password is a 6-digit figure which is required before entering the
modification mode of "Control parameter", "Load setting", "Device parameter", "Device
password", "Factory reset" pages. The page of device password in the diagram below:
Device PSW
OriPSW: XXXXXX
NewPSW: XXXXXX
Note: Solar charge controller default password is"000000"
Device PSW
OriPSW: XXXXXX
Charge mode
NewPSW: XXXXXX
Charge Mode
The charge mode of solar charge controller could be selected via the page of charge
Vol.Compen./SOC
mode (Voltage Compensate, SOC); the default charge mode is Voltage Compensate
charge mode.
Charge Mode
Vol.Compen./SOC
2.
Device Parameter
Bklight: XXXS
Month-Day-Year
H:M:S
13
Advertisement
Table of Contents
