Warnings - JinkoSolar JKM350PP-72-DV Installation Manual

(xxx=250-305, in steps of 5, 60 cells)
JKMxxxM-60-BDVP
(xxx=260-315, in steps of 5, 60 cells)
JKMxxxM-60H-BDV
(xxx=250-305, in steps of 5, 60 cells)
Notes:
① PP: the eagle+ series module
② DV: photovoltaic Module-eagle dual with 1500V
③ JKMS: the smart series module
④ J: customized product for Japanese market
⑤ BDV:the bifacial N type series module
⑥ BDVP:the bifacial P type series module
⑦ H:Half-cut series module
Make sure the module array is designed in such a way not to exceed the maximum
system voltage of any system component such as connectors or inverters.
The assembly is to be mounted over a fire resistant roof covering rated for the
application. Before mounting the module, please consult your local building
department to determine approved roofing materials.
The modules are qualified for application class A: Hazardous voltage (IEC 61730:
higher than 50V DC; EN 61730: higher than 120V), hazardous power applications
(higher than 240W) where general contact access is anticipated. Modules qualified
for safety through EN IEC 61730-1 and -2 within this application class are considered
to meet the requirements for Safety Class II.

1.3 Warnings

 PV modules generate DC electrical energy when exposed to sunlight or other
light sources. Active parts of module such as terminals can result in burns, sparks,
and lethal shock.
 Artificially concentrated sunlight shall not be directed on the module or panel.
JKMxxxM-60H-BDVP
Group 8
-2-