Config Teleworker - Mitel MiVoice 6940 User Manual

Mitel MiVoice 6940 IP Phone User Guide
To configure the display settings:
1. Press the
2. Tap the Display icon.
3. Tap the left and right arrow buttons in the Brightness Level field to increase or decrease the
intensity of brightness on the LCD (valid values are from Levels 1 (darkest) to 5 (brightest).
4. Tap the Screen Saver Timer field.
5. Enter a value, in minutes, using the dialpad keys. You can set the timer from 1 to 90 minutes.
The default is 5 minutes.
6. Tap the Dimmer Level field.
7. Tap the left and right arrow buttons in the Brightness Level field to increase or decrease the
intensity of brightness on the LCD when the screen saver is displayed (valid values are from
Levels 0 (LCD off) to 5 (brightest).
8. Press the Save softkey to save your changes.

Config Teleworker

The Mitel MiVoice 6940 IP phone can be configured to work in teleworker mode, which allows remote
workers access to the same rich communications capabilities as in-office workers when using the
IP phones.
The Config Teleworker menu allows you to enter the IP address of the server providing the
teleworker configuration details.
To enter the IP address of the teleworker configuration server on the Mitel MiVoice 6940 IP phone:
1. Press the
42
(Settings) key on the phone to enter the Settings menu.
(Settings) key on the phone to enter the Settings menu.