Application-Specific Data - Siemens SITRANS F US SONO 3100 Operating Instructions Manual

6.5

Application-specific data

In case the device needs service, the factory will typically request information about
application and flowmeter.
The following tables can be used as a preparation guide before taking contact to Siemens.
Note
Sketch
It is recommended to prepare a sketch of the installation / application.
Table 6- 1 Application data
Liquid
Measurement range
Nominal size [mm]
Process temperature [°C]
Ambient temperature (transmitter) [°C]
Pressure [PN]
Gas/solid content [%]
Explosion protection
Table 6- 2 Sensor data
Serial-No. (See system label)
Order.No. (See system label)
Flow (Menu 1.2)
Sound velocity [600 [m/s] ≤ Medium ≤ 2000 [m/s]]
(Menu 1.5)
Ultrasonic amplitude [%](Menu 1.6)
Frequency output [Hz] (Menu 1.7
Device status, error message, frequency, ... (Menu
2.1)
Upper range value for flow (Menu 3.1.2)
Low flow cut-off [%] (Menu 3.1.6)
Software version (Menu 5.2.3)
Gain (Menu 6.5.1)
Amplitude (Menu 6.5.2)
SITRANS F US SONO 3100
Operating Instructions, 03/2011, A5E00814513-06
Chemical formula
Name of liquid
Concentration
Density
Viscosity at 20°C [cSt]
Viscosity at process temperature [cSt]
Maintenance and repair
6.5 Application-specific data
29