Maintenance; Cleaning; Repair; Returning Devices - ABB TTF200 Operating Instruction

TTF200 FIELD-MOUNT TEMPERATURE TRANSMITTER | OI/TTF200-EN REV. A

10 Maintenance

WARNING
Risk of explosion!
Faulty transmitters may not be placed into operation by
the user.
Repairs must be performed from ABB service.
For transmitters that are used as intended under normal
operation, no maintenance is required.
No on-site repair or replacement of electronic parts is
planned.

10.1 Cleaning

When cleaning the exterior of meters, make sure that the
cleaning agent used does not corrode the housing surface
and the gaskets.
When using the device in potentially explosive atmospheres,
observe the notice on cleaning in the chapter titled
'Protection against electrostatic discharges' on page 12 .

11 Repair

11.1 Returning devices

Use the original packaging or a secure transport container
of an appropriate type if you need to return the device for
repair or recalibration purposes. Fill out the return form (see
the Appendix) and include this with the device.
According to the EU Directive governing hazardous
materials, the owner of hazardous waste is responsible for
its disposal or must observe the following regulations for
shipping purposes:
All devices delivered to ABB must be free from any
hazardous materials (acids, alkalis, solvents, etc.).
Please contact Customer Center Service acc. to page 2 for
nearest service location.

12 Recycling and disposal

12.1 Disposal

NOTICE
Products that are marked with this symbol may
not be disposed of through municipal garbage
collection points.
This product and its packaging are manufactured from
materials that can be recycled by specialist recycling
companies.
Bear the following points in mind when disposing of them:
— This product is not subject to WEEE Directive
2012/19/EU or relevant national laws (e.g. ElektroG in
Germany).
— The product must be surrendered to a specialist
recycling company. Do not use municipal garbage
collection points. Only privately used products may be
disposed of in the municipal garbage according to the
WEEE directive 2012/19/EU
— If it is not possible to dispose of old equipment
properly, ABB Service can take receipt of and dispose of
returns for a fee.
13 Spare parts, consumables and
accessories
Repair and maintenance activities may only be performed by
authorized customer service personnel.
When replacing or repairing individual components, use
original spare parts.

14 Specification

NOTICE
The detailed device data sheet is available in the download
area at www.abb.com/temperature.
31