Configuration Using Kpg-89D - Kenwood TK-2180 Modification Information

3 CONNECT THIRD PARTY OPTIONS
• Position other cable as shown below.
9. Reinstall the shielding plate, top rubber packing, and
the top case of the TK-7180/ 8180 transceivers.

3.6.3 Configuration using KPG-89D

You can configure the GPS receiver information to the
transceiver using KPG-89D after installing the receiver.
Following procedures shows how to configure the GPS
receiver information.
1. Run the KPG-89D.
2. Select
"Program" > "Read Data from the Transceiver".
You can also click the
The Read Data from the Transceiver window appears.
3. Click "Read".
The KPG-89D starts reading the configuration data
from the TK-7180/ 8180 transceivers.
4. Select "Edit" > "Optional Features".
The Optional Features window appears.
5. Click the Common-Page 3 tab.
Configure the COM port 1 or 2 to "GPS" and polarity.
Refer to the "FPRG 7.6 6.7.3 Common-Page 3 Tab"
for details.
6. Select
"Edit" > "FleetSync"
The FleetSync window appears.
49
icon on the Toolbar.
.
Modification Information
7. Click the GPS tab.
Configure the GPS function same as 3.5 External
GPS Unit. Refer to the "FPRG 6.12.6 GPS Tab" for
details.
8. Select
"Program" > "Write Data to the Transceiver"
can also click the
The Write Data to the Transceiver window appears.
9. Click "Write".
The configuration data having the GPS information
will be configured to the transceiver.
icon on the Toolbar.
Version: 1.13 USA
. You