Configuration Using Kpg-71D - Kenwood TK-2180 Modification Information

2.3.9 Configuration using KPG-71D

To configure KDS-100, use FPU KPG-71.
For PC2 connection, use FPU version 1.30 or later, and
use latest firmware (Check sum=7AC5) or later. You can
downroad them from Dealer Tools of KENWOOD Dealer
Web site.
1. Open KPG-71D.
2. Read data from KDS-100.
"Program> Read from MDT ".
3. Change model type to "FleetSync PC2".
"Model>Model Information".
The model information form appears, and select
FleetSysnc PC2 from plldown menu. Then press OK.
4. Configure the port logic state in the following
conditions to interface with the KDS-100 function port.
"Edit> Optional Features> Radio".
Table 2-13 Radio Port Logic Configuration
SQ Squelch Detect Input
DTC Data TX Channel Control Output Active Low
TXS/ LOK Transmitter Active Sense Input
AM Speaker Mute Output
MM Mic Mute Output
5. Select
"Program" > "Write to MDT"
The Write Data to MDT window appears.
Click "Write".
The configuration data is written to the KDS-100.
Version: 1.13 USA
Active Low
Active Low
Active Low
Active Low
.
Modification Information
2 CONNECT OPTIONAL DEVICES
15