Notification of a Call from a Remote Station by the Bell Function
The Bell may be set to sound an Alert when a call from another station containing a corre-
sponding tone, DCS or pager code is received." "icon on the LCD blinks while the sound
alerts.
Press and hold
the Function key
(Entering the Set Mode)
1. Press the [p] or [q] to select the desired number of
times (1-8 times or continuous) the Bell rings.
• • • OFF 1T 3T
5T 8T CONT (continuous) • • •
2. Press the PTT switch to save the setting and return to
normal operation.
z The default setting is "OFF".
z If setting the "CONT" (continuous), the bell keeps sounding until operating something.
z If "OFF" is set in the Set Mode "5 BEEP", the bell does not sound.
Press the p or q key
→
(Selecting "6 BELL")
9
→
Press the Function key
Example of New PAGER function
BELL Icon