Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Yaesu FT-4XR
Summary of Contents for Yaesu FT-4XR
- Page 1 FM 144/430MHz DUAL BAND TRANSCEIVER FT-4X FT-4X Operating Manual...
-
Page 2: Symbols Description
This icon indicates cautions and information that should be read. This icon indicates notes, tips and information that should be read. This icon indicates other pages containing relevant information. This icon indicates FT-4X Advance Manual on the YAESU Website containing relevant information. - Page 3 Introduction Thank you for purchasing this Yaesu product. • FT-4XR/4XE is a handheld transceiver for operation in the 144 MHz and 430 MHz Amateur radio bands. • Bridged Transless (BTL) amplifier provides One Full Watt of Audio in spite of small size.
-
Page 4: Turning The Power On
④ Tuning the frequency ⑥ Transmitting Signals Press the z Transmitting ⑤ Adjusting the squelch setting Press the , then speak into microphone. The squelch level may be adjusted to mute the background noise when no signal is FT-4XR/FT-4XE Operating Manual... - Page 5 While pressing and holding the MONI/T.CALL Switch, the squelch is ⑤ opened temporarily. Press the Function key, then press the MONI/ T.CALL Switch to adjust the squelch level. • European version Press the MONI/T.CALL switch to activates the T-CALL(1750 Hz). FT-4XR/FT-4XE Operating Manual...
- Page 6 The display shows frequecny and current operating condition. ⑬ Keypad The functions of the keypad are described in detail on page 5. ⑭ SP jack SP jack provides connection for an microphone. ⑮ MIC jack MIC jack provides connection for microphone and clone cable. FT-4XR/FT-4XE Operating Manual...
- Page 7 : Appears when a function key is pressed. TX Power Level Indicator (LOW/MID TX Power Selected) Tx Power Icon TX Power Meter during transmission HIGH ( 5 W ) ( No display ) MID ( 2 W ) LOW ( 0.5 W ) FT-4XR/FT-4XE Operating Manual...
- Page 8 Appears when the bell function is enabled. Appears when the lock function is enabled. Appears when the Memory Bank function is enabled. Appears when the VOX ( Voice Operated Transmit ) function is enabled. FT-4XR/FT-4XE Operating Manual...
-
Page 9: Memory Recall
“U”, or channel “V” Number “9”, or characters Recalls the stored memory DTMF autodialer － Number “9” “W”, “X”, “Y”, channel settting WXYZ or “Z” Recalls the stored memory － － Number “0” Number “0” channel FT-4XR/FT-4XE Operating Manual... -
Page 10: Installing The Antenna
2. ② Push the battery pack in until the battery latch clicks securely. Removing the Battery Pack 1. Turn the transceiver OFF. While sliding the latch in the direction of the arrow, as shown in the illustration, slide the battery pack downward and out of the transceiver. FT-4XR/FT-4XE Operating Manual...
Need help?
Do you have a question about the FT-4XR and is the answer not in the manual?
Questions and answers