Notification Of A Call From A Remote Station By The Bell Function; User Programmed Reverse Ctcss Decoder - Yaesu FT-70DR Advance Manual

Notification of a Call from a Remote Station by the Bell Function

The Bell may be set to sound an Alert when a call from another station containing a cor-
responding tone, DCS or pager code is received. " " icon on the LCD blinks to provide
a later notice of the call from the other station.
1. Press and hold the [ F ] key, rotate the DIAL knob to se-
lect the Set Mode [ 8 BELL ] .
2. Press the [ F ] key.
3. Rotate the DIAL knob to select the desired number of
times (1-20 times or continuous) the Bell rings.
–––  OFF  1T  2T  –––
 20T  CONT (continuous)  –––
4. Press the PTT switch to save the setting and return to
normal operation.
z The default setting is "OFF".
z If setting the "CONT" (continuous), the bell keeps sounding until operating something.

User Programmed Reverse CTCSS Decoder

The tone signal frequency can be set at 100 Hz intervals between 300 Hz and 3000 Hz
to mute the audio when receiving a signal containing a CTCSS tone matching the pro-
grammed tone.
1. Press the [ F ] key, then press the [ 5 ] (SQ TYP) key.
2. Rotate the DIAL knob to select the "PR FRQ".
3. Press the PTT switch to save the setting and return to
normal operation.
4. Press the [ F ] key, then press the [ 6 ] (CODE) key.
The setting screen containing the CTCSS tone frequen-
cies is displayed.
5. Rotate the DIAL knob to select the desired CTCSS
tone frequency.
6. Press the PTT switch to save the setting and return to
normal operation.
12
FT-70DR/DE Advance Manual
Bell icon