Yaesu FT-4VR Advance Manual page 25

1 APO
Set the length of time until the transceiver turns off automatically.
OFF
0.5 H –
12 H (Hours)
2 AR BEP
Selects the beep option during ARTS operation.
OFF
INRANG
ALWAYS
For more details, see "ARTS Alert Beep Options"
3 AR INT
Selects the Polling Interval during ARTS operation.
25 SEC
15 SEC
For more details, see "ARTS Polling Time Options"
4 BCLO
Enables/Disables the Busy Channel Lock-Out feature.
Preventing transmissions when the receive channel is busy.
BCL.OFF
BCL.ON
5 BEEP
Sets the beep function on pressing the keypad, or stopping the receiver scan-
ning.
KEY+SC
KEY
OFF
Automatic Power OFF (APO)
" "icon appears on the LCD; the transceiver is turned OFF
automatically when no operation is performed for a specified
period of time.
Beep sounds about 60 seconds before turn OFF.
No alert beeps sound.
Beeps sound only when the transciever first detects that you
are within range.
Beeps sound every time a polling transmission is received
from the other station (every 15 or 25 seconds when in range).
25 seconds Polling interval
15 seconds Polling interval
Permits starting a transmission while receiving a signal.
Disables transmissions while receiving a signal.
The beeper sounds when you press any key, or when the
scanner stops.
The beeper sounds when you press any key.
Beeper is disabled.
25