Nautilus NH-1800 Operator's Manual page 165

NH-1800
ADNXX
B0001
C001Y
C002Y
C0030
C0031
C0032
Receipt printer connection failure
Expaded Flash Memory error
Cash Dispenser Unit sensor cover 1
Ex) 'C0015' ; CS2(NS4), CS4A(NS3)
covered CS4(NS3)
Occurs before or after initialization and
dispensing notes.
Cash Dispenser Unit sensor covered 2
Ex) 'C0023' ; CS1A, CS1B(NS2) covered
CS13(NS4)
Occurs before or after initialization and
dispensing notes.
Cash Dispenser Unit main motor failure
Occurs during initialization.
Occurs before notes are dispensed.
Gate solenoid echo error
Occurs during initialization.
Occurs before notes are dispensed.
Outlet solenoid echo error
Occurs during initialization.
1. Check if communication cable
between the Control Electronics and the
Slip Printer is cut or
the connector is wrongly inserted.
2. Check communiation logic of the
Control Electronics and the Slip Printer
board.
3. Check if the CPU of the Slip Printer
board is normally running.
4. Check if the power is normally
supplied to the Slip Printer.
1. Replace CE mainboard
1. Check if ther are notes. If so,
remove them.
2. Check if cable is cut or the connector
is wrongly inserted.
3. Check logic related to the sensor of
the Cash Dispenser Unit board.
1. Check if there are notes. If so,
remove them.
2. Check if cable is cut or the connector
is wrongly inserted.
3. Check logic related to the sensor of
the Cash Dispenser Unit board.
1. Check the main motor of the Cash
Dispenser Unit.
2. Check CS8(NS8) sensor.
3. Check if cable is cut or the connector
is wrongly inserted.
4. Check logic relatd to the motor of the
Cash Dispenser Unit board.
1. Check if cable is cut or the connector
is wrongly inserted in the gate solenoid.
2. Check the gate solenoid.
3. Check logic of the gate solenoid in
the Cash Dispenser Unit board.
1. Check if cable is cut or the connector
is wrongly inserted in the outlet
solenoid.
7 - 17
7. Appendix