Nautilus NH-1800 Operator's Manual page 162

NH-1800
20005
20010
20011
20012
20013
20014
2YY15
Cash Dispenser Unit data
(country, cassette, shutter) setting error
Occurs during initialization.
Receipt paper jam in the receipt printer.
The jam detection sensor checks if there is
paper before starting operation.
TPH Headup Lever Open
The feed lever of the recipt printer is open.
It was detected that the feed lever was
open before ther receipt printer started to
operate.
Receipt paper is empty.
It was detected that receipt paper was
empty before the receipt printer started to
operate (when both the paper empty
sensor and the paper sentting sensor are
lights).
The thermal head of the receipt printer is
overheated (before the receipt printer
starts to operate).
Note has been detected on the return path
5. Check logic related to the door switch
in the Control Electronics.
1. Check Cash Dispenser Unit
information.
2. Check battery back-up SRAM.
3. Check the battery.
1. Remove paper jam and paper scraps.
2. Check the lever operation position in
the sensor.
3. Check if the sensor is polluted.
4. Check if cable is cut or the connector
is wrongly inserted.
5. Check logic related to the jam
detection sensor of the Slip Printer
board.
1. Check Headup Lever
1. Close the feed lever.
2. Check if the micro switch of the feed
lever normally functions.
3. Check if cable of the micro switch is
cut in the feed lever and the connector
is wrontly inserted.
4. Check logic related to the micro
switch of the feed lever of the Slip
Printer board.
1. Fill paper.
2. Check the lever operation position in
the sensor.
3. Check if cable is cut or the connector
is wrongly inserted.
4. Check logic related to the paper
empty and the paper setting sensors in
the Slip Printer board.
1. Check and replace the thermal printer
head.
2. Check logic related to the TPH of the
PR board.
1. Remove the jammed note on the
7 - 14
7. Appendix